Configuring "Basic" Device Settings - Motorola AP-7131 Installation Manual

24 AP-7131 Access Point: Installation Guide
3.2

Configuring "Basic" Device Settings

Configure a set of minimum required device settings within the
values defined within the Quick Setup screen are also configurable in numerous other locations
within the AP-7131 menu tree. When you change the settings in the Quick Setup screen, the values
also change within the screen where these parameters also exist. Additionally, if the values are
updated in these other screens, the values initially set within the Quick Setup screen will be updated.
The following table illustrates the AP-7131's default configuration.
WAN (GE2)
Static IP: 10.1.1.1
Static Mask:
To define a basic AP-7131 configuration:
LAN 1 (GE1)
DHCP Client
Auto-Update
255.0.0.0 Enabled
Default Gateway
Ethernet Port
Enabled
AP-7131 Quick Setup
Access via WAN
LAN 2
Disabled HTTPS, SSH, SNMP,
Telnet: Enabled
screen. The
port