Table of Contents
Advertisement
3.2.3
Creating a Secure Recovery WLAN
When staging an AP 7181, it is recommended to create a security recovery WLAN to be
used in case the unit becomes unreachable due to errors in configuration or fluctuating
conditions which affect transmission across the wireless network. This is particularly
important if your AP 7181 is addressed via DHCP as the IP address would be lost if a node
became stranded. If the AP 7181 is statically addressed you can connect any configured
WLAN mapped to LAN 1.
1. Click the Enable button next to LAN2 in the LAN branch under Network
Configuration.
After enabling LAN2 you will see an entry for LAN2 under the LAN branch.
Select LAN2. Notice that LAN2 is configured with an IP address of 192.168.1.1
255.255.255.0 by default and is also a DHCP server.
Getting Started
71
Advertisement
Table of Contents
