PMP 320 Hardware Installation
Figure 3-6
Configuring CMM4 ports
To configure the ports that have been connected in this installation procedure, refer to the
CMM4 User Guide
Other Installation Considerations
If two CMM4 devices are synchronized together, the CMM4 that does not have a GPS needs
to be set up via the GUI as a CMM slave device. Refer to the
http://motorola.wirelessbroadbandsupport.com/software/
Port Status Showing Power Fault
located at:
http://motorola.wirelessbroadbandsupport.com/software/
Preliminary
Configuring CMM4 ports
CMM4 User guide
.
.
located at :
JUL 2010