Handling Precautions; Esd Precautions; Related Information - Sun Oracle SPARC T4-4 Installation Manual

Handling Precautions

Caution – Deploy the anti-tilt bar on the equipment rack before beginning an
installation.
Caution – Always load equipment into a rack from the bottom up so that it will not
become top-heavy and tip over.
Caution – A fully configured SPARC T4-4 server weighs approximately 175 lb.
(79 kg). An equipment lift is required to lift and mount this server into a rack
enclosure when using the procedures in this document.
Caution – Always communicate your intentions clearly before, during, and after
each step of the rackmounting procedure to minimize confusion.

Related Information

"ESD Precautions" on page 13
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded
antistatic wriststrap, footstrap, or equivalent safety equipment to prevent
electrostatic damage when you install or service the server.
Caution – To protect electronic components from electrostatic damage, which can
permanently disable the server or require repair by service technicians, place
components on an antistatic surface, such as an antistatic discharge mat, an antistatic
bag, or a disposable antistatic mat. Wear an antistatic grounding strap connected to a
metal surface on the chassis when you work on server components.
Preparing for Installation 13