Table of Contents
Advertisement
Step 3.
Go through the mast rotation cleat again and tie it down to the staymaster.
2.2.8. Spinnaker halyard
Step 1.
The spinnaker halyard has already been put through the pulley in the top of
the mast so we have the two ends at the mast base.
Step 2.
Take the end which goes through the spinnaker hoist cleat and take it
through the pulley in the front of the trampoline.
Step 3.
Then go through the cleat at the back of the trampoline, which is attached to
a shock cord. Make sure you go under the foot strap.
Step 4.
Take the spinnaker halyard through the hole in the trampoline next to the
mast rotation hole.
Step 3.
Step 2
Spinnaker halyard
Step 1, 2, 3 and 4
Go under the foot strap!
55
Advertisement
Table of Contents
