Fixing The Foot Strap; Trapeze Shockcord - Nacra F20 Carbon Assembly & Rigging Manual

1.4.2. Fixing the foot strap

Step 1.
Tie the middle foot strap into place firmly

1.4.3. Trapeze shockcord

Step 1.
The trapeze shock cords for the crew are already put in the front beam and
need no attention. Take the two aft trapeze shock cords for the helm out of
the box.
Step 2.
Put the aft trapeze shock cord through the trapeze hole in the hull and tie a
knot on the outside to prevent the shock cord from getting through the hole
again.
Step 3.
Go under the trampoline and take the other end of the shock cord and put it
through the trapeze tube in the other hull. Make sure to tie a knot on both
ends of the shockcord to prevent it from sliding through the hole.
Trapeze shockcords
Step 1 and 2
Fixing the foot straps
Step 1
13