Tack Release Line And Tack Line - Nacra F20 Carbon Assembly & Rigging Manual

Step 2.
Put both ends of the shockcord through the holes on each rear side of the
trampoline. Make sure you go under the foot strap! On the starboard side
you also have the tack line shock cord running through the hole in the tram-
poline. Tie the shockcord down to the trapoline lacing lines.

1.8.3. Tack release line and tack Line

Step 1.
Take the tack release line from the box and put both ends through the two
holes in the trampoline. Tie a figure 8 knot to the end in the middle of the
trampoline (underneath the tramp!). The right end of the tack release line
can hang under the trampoline for now
Step 2.
Take one end of the spinnaker tack line and make a few knots at the end.
This will make it easier to pull the tack of the spinnaker forward. Make it look
like the one on the picture. Then tie the shock cord which came out of the
right, rear corner of the trampoline to this end of the tack line.
Tack release line and tack line
Step 1
Step 2
Step 2
36