Mainsail Cunningham; Mainsail Outhaul - Nacra F20 Carbon Assembly & Rigging Manual

2.3.7. Mainsail cunningham

Mainsail cunningham
Take the end of the short cunningham line and take it through the pulley on
that side of the sail. Then take it through the clamcleat on the bottom of the
Pulleys
mast.

2.3.8. Mainsail outhaul

Take the outhaul line and tie a 8-knot on one end. Take the other end
through the hole in the clamcleat on the end of the carbon boom. Then go
through the sail and pull the line through the clamcleat. Tie a figure 8-knot
Mainsail outhaul
on this side of the outhaul line too. Just put a tiny bit of tension on this line.
While sailing you should be able to put a fist between the sail and the middle
of your boom.
65