Step 5.
Grease the diamond adjuster bolt, place the washer and put the bolt through
the mast base. Then turn it in the brass diamond block, but only get the th-
read started. We don't want to put tension on the diamond wires, since we
still have to attach them in the top.
Step 6.
Push the mast base in the mast.
Step 7.
Screw the two screws on the left and right side of the mast into the mast
foot. Put a plastic ring in between.
1.6.2. Fixing the diamonds
Step 1.
Bend the diamond wire connector away from the mast.
Fixing the diamonds
Step 1
Step 5
Grease the bolt!
Only get the thread started!
Step 6
Step 7
18