Table of Contents
Advertisement
Step 3.
Tie one end of the jib halyard to the top of the jib halyard S-hook. Put the
other end through the pre drilled hole in the S-hook and tie a 8 knot.
1.6.9. Adjustable trapeze units
Step 1.
Take all of the parts from the box.
Step 2.
Take the trapeze line from the trapeze hook through the trapeze block. Make
sure that you put this line through the side of the trapeze block where the
distance between the middle of the wheel and the bottom of the trapeze
block is biggest. Then go through the white trapeze stopper and tie a knot at
the end.
Adjustable trapeze units
Step 1
Step 3
Step 2
27
Advertisement
Table of Contents
