Fixing The Stays And Trapeze Wires - Nacra F20 Carbon Assembly & Rigging Manual

2.1.2. Fixing the stays and trapeze wires

Step 1.
Attach the bottom of the sidestays to the staymaster. Make sure the stay-
master is at its maximum length, that is number 10.
Step 2.
Attach the adjustable trapeze unit to the trapeze shockcords. The trapeze
wire which is most on front of the mast belongs to the crew and the one that
is most on the back of the mast belongs to the helm. The trapeze shockcord
which comes out of the two sides of the front beam belongs to the crew and
the ones which come out of the hull belong to the helm. Tie the trapeze
shockcord down to the end of the line of the adjustable trapeze unit which
goes to the trapeze hook.
Step 2
Rear trapeze wire
Fixing the stays and trapeze wires
Step 1
Maximize staymaster lenght
Step 2
Front trapeze wire
44