Step 5.
Unscrew the two phillips screws on both ends of the crossbar and place the
crossbar over the two rubber rods on the tiller arms. Make sure the hardwa-
re for the joystick is on top. Don't put the phillips screws in yet, because we
need to align the rudders!
Step 6.
Lock the rudders in the down position. Look at the pictures for instructions.
It's the same when you're out on the water. To unlock the rudder simply pull
the tiller arm upward or pull the tip of the rudder backwards.
Step 5
Dont put the phillips screws in
yet!
Step 5
Step 6
Locking the rudders part 1
32