Table of Contents
Advertisement
1.4. Trampoline
1.4.1. Fitting the trampoline
Step 1.
Slide the front edge of the trampoline into the slot in the front beam. The
foot straps should be facing up. Make sure the trampoline is in the middle of
the catamaran.
Step 2.
Insert the carbon tie rod into the slot in the rear of the trampoline.
Step 3.
Attach the rear lacing line. To do this, tie one end of the aft lacing line to a
button which is located the most right or left of the rear beam (it does not
matter on which side you start). With the other end of the line we continue
through the tie rod in the trampoline. We then go back to the button we ca-
me from and then move to the next button and repeat this process until we
reach the other end of the beam. Make sure you do this the right way, since
there is only one right way to do this (look at the pictures).
Step 2
Trampoline
Step 1
Step 3
10
Advertisement
Table of Contents
