Table of Contents
Advertisement
Step 5.
Take one of the side lacing lines and tie it down onto the first trampoline
spanner band. That is the one closest to the front beam on either side of the
boat. We take the other end of the lacing line and take it around the first
button on the hull. We then go back through the trampoline spanner band
and then move to the next trampoline spanner band. When moving to the
next trampoline spanner it is important to run the lacing line under the part
of the line which came from the previous spanner (look at the pictures). Re-
peat this process and tie the lacing line down at the end. As we have only
done one side of the trampoline so far, you should not tighten it very firmly.
Just have a bit of tension.
Step 6.
Repeat step 5 for the other side of the trampoline and tighten it very firmly.
Make sure your trampoline is in the middle of your hulls after this whole pro-
cess.
Step 5 and 6
Step 5 and 6
Step 5 and 6
12
Advertisement
Table of Contents
