Tack Line; Jib Traveler; Cunningham - Nacra F20 Carbon Assembly & Rigging Manual

Hide thumbs Also See for F20 Carbon:
Table of Contents

Advertisement

2.2.3. Tack line

We previously put the end of the tack line in the trampoline bag. Take this
end through the pulley on the end of the spinnaker pole. Be sure to go under
the bridle wires.

2.2.4. Jib traveler.

One end of the jib traveler should already be attached to the jib track. Take
the other end through the clamcleat on the beginning of the spinnaker pole.

2.2.5. Cunningham

Step 1.
Take the two ends of the cunningham (which come out off the cunningham
cleats on mast) and place them on either side of the front beam. That is
where the blue line goes into the beam.
Jib traveller
Into beam
Into beam
Tack line
Cunningham
Step 1
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

F16

Table of Contents