Nacra F20 Carbon Assembly & Rigging Manual page 47

Hide thumbs Also See for F20 Carbon:
Table of Contents

Advertisement

Step 3.
Check that all the stays and trapeze wires are free of obstructions. Also
check that the jib halyard is free. The person at the mast base takes a trape-
ze wire to help the person at the back with raising the mast. It is best to put
your foot on the mast base to prevent it from coming off the ball.
Step 4.
The person at the top of the mast walks forward and lifts the mast at the
same time. The person at the mast base, who is holding a trapeze wire, tries
to pull the mast up as well. Be sure to hold the mast base on the mast ball
with your foot!
Step 5.
The person who is lifting the mast steps on the trampoline while lifting the
mast. It is important that the person at the mast base pulls on the trapeze
wire to make it easier for the person at the back. If the lifting is too heavy,
then put a third person on the trampoline to take the mast.
CAUTION: Check for overhead wires and be sure the area behind the boat is clear of people! A mast which comes in contact with elec-
trical power lines can cause serious injury or death.
Step 4
Hold your foot on the mast base!
Step 3
Put your foot on the mast base to
prevent the mast from coming off
the ball!
Step 5
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

F16

Table of Contents