Fixing The Trapeze Wires - Nacra F20 Carbon Assembly & Rigging Manual

Step 3.
Put the adjustable trapeze line through the clam-cleat and trapeze block in
the way shown on the pictures. Mount a shackle on top of the clam cleat.
Step 4.
Repeat this for all 4 adjustable trapeze units.

1.6.10. Fixing the trapeze wires

Step 1.
Take the other shackle, two trapeze wires, 4 plastic washers and 4 adjusta-
ble trapeze units (for the race package we just assembled them, but for the
standard type we do this in step 3).
Step 2.
Put the two trapeze wires in the shackle and attach the shackle to the mast
hound in the top hole. Again, use two plastic washers on both sides. Tighten
the shackle firmly.
Step 4
Step 3
Fixing the trapeze wires
Step 1 and 2
28