Nacra F20 Carbon Assembly & Rigging Manual page 64

Hide thumbs Also See for F20 Carbon:
Table of Contents

Advertisement

Step 2.
The person with the halyard pulls on the halyard to raise the sail a bit and
holds the halyard tight. This will put the ring above the locking system.
Step 3.
The person at the mast then twists the mast at right angle with the sail and
pulls the sail down. Twisting the mast like this will unlock the ring.
Step 4.
As you are pulling the sail down it is best to roll up the sail at the same time.
Step 5.
When the sail its totally down and rolled up from the bottom, roll it up again
but this time from the top. While you are rolling the sail untie all the battens
again.
Step 4 and 5
Step 2 and 3
Hoist the main a bit further and
then twist the mast to 90 degrees.
Then pull the sail down!
64

Advertisement

Table of Contents
loading

This manual is also suitable for:

F16

Table of Contents