Spinnaker Halyard - Nacra F20 Carbon Assembly & Rigging Manual

2.1.3. Spinnaker halyard

Step 1.
Take the spinnaker halyard and go to the mastbase. Take the thin end of the
halyard and go through the spinnaker hoist block.
Step 2.
Go through the gap in the right rake adjuster bars with that same end. Go
through the slot at the starboard side of the mast!
Step 3.
Go to the top of the mast and pass the stays on the forward side of the
mast.
Step 2
Starboard side!
Spinnaker halyard
Step 1
Step 3
In front of all the stays!
45