Table of Contents
Advertisement
Step 4.
Hoist the jib and close the zipper at the same time. When you are nearly the-
re look up to the jib halyard ring and hoist the S-hook through the ring and a
bit further. Then pull the jib down a bit to lock it in the ring. The S-hook has
now locked the jib.
Step 5.
Put the rest of the halyard in the zipper and then close the zipper completely.
Step 6.
The jib cunningham can be adjusted on both sides of the boat by a black
rope coming from under the trampoline near the front beam. From there it
runs through a cleat, a block at the rear and of the spi pole to an identical
cleat on the other side of the boat. From the block at the spi pole a rope runs
to a little block at the jib-tack on the spi pole. From there go through the ring
on the jib tack and tie the end down to the spi pole as shown on the picture.
Step 5
Step 4
Step 6
59
Advertisement
Table of Contents
