Table of Contents
Advertisement
Step 7.
Take the pulley with the shackle near the jib track and attach it to the clew
plate.
2.3.3. Lowering the jib
Step 1.
Undo the jib sheet and the jib cunningham.
Step 2.
Unzip the jib a little and pull on the halyard to raise the jib a bit. Then hold
the jib in position with one hand and pull on the other side of the halyard to
twist the S-hook. Then pull down the jib. When you do this properly the S-
hook will go through the ring again, without locking again.
Step 3.
After unlocking the jib, pull the jib down and unzip at the same time.
Lowering the jib
Step 1
Step 7
Step 2 and 3
Pull the jib up a bit and then
twist the S hook with the halyard.
Then pull the jib down.
60
Advertisement
Table of Contents
