Table of Contents
Advertisement
6.2.
Trapeze wires steel
Tools needed:
- Long nose plier
- Self amalgamating tape
44.
6mm 1/4
1.
Use the shackle 6mm 1/4, 2x nylon washers and the
trapeze ropes or wires.
2.
Put the shackle through the center hole.
3.
Install trapeze wires on each side.
•
Tighten the shackle firmly with the long
nose plier!
4.
Tape the shackle with self amalgamating tape.
2x
2x
Advertisement
Table of Contents
