File Name Entry; Priority Override - Kyocera TASKalfa 5500i Operation Manual

File Name Entry

Names a copy job. Add other information such as date and time or job number as necessary. You can check a
job history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.

File Name Entry

Add a file name.
Additional information such as Job No.
and Date and Time can also be set.
File Name
doc
Additional Info
Job No.
Add Shortcut
Status

Priority Override

Suspends a current job and gives the selected job priority for copying. The suspended job resumes after Priority
Override copying is finished.
NOTE:
The current job that is selected as Priority Override cannot be suspended.
The procedure for using Priority Override is explained below.
Copies
Date and Time
Cancel OK
10/10/2010 10:10
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [File Name Entry].
4
Press [File Name], enter the name for a copy job,
and press [OK].
To add date and time, press [Date and Time]. To
add job number, [Job No.]. Added information is
displayed in Additional Info.
5
Press [OK].
6
Press the Start key to start copying.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Priority
Override].
4
Press [On] to select Priority Override.
5
Press [OK].
6
Press the Start key. The current copy job is
suspended and the copy job selected in Priority
Override starts. The suspended job resumes after
Priority Override copying is finished.
4-42
Copying Functions