Kyocera TASKalfa 5500i Operation Manual page 318

Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default resolution.
4
Press [OK].
Color Selection
Select the default color mode for scanning documents. The available default settings are shown below.
Color mode
Auto Color (Color/Gray)
Auto Color (Color/B & W)
Full Color
Grayscale
Black & White
Use the procedure below to select the default color mode.
1
Press the System Menu key.
2
Press [Common Settings], [
default color mode.
3
Press [OK].
File Format
Select the default file type to send the scanned originals. The available default settings are shown below.
Item
PDF
TIFF
JPEG
XPS
High Comp. PDF
], [Next] of Function Defaults and then [Change] of Scan Resolution.
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Grayscale.
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Black and White.
Scan document in full color.
Scan document in grayscale for smoother and finer finish.
Scan document in black and white. File size is smaller than Full
Color or Grayscale.
], [Next] of Function Defaults and then [Change] of Color Select.Select the
Send files in PDF format.
Send files in TIFF format.
Send files in JPEG format.
Send files in XPS format.
Send files in High Comp. PDF format (refer to page 6-16).
9-18
Default Setting (System Menu)
Description
Description