Interrupt Copy - Kyocera TASKalfa 5500i Operation Manual

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When the interruption copy ends, the machine resumes the paused print jobs.
NOTE:
If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically
canceled and printing resumes. You can change the delay until interrupt copying is canceled. Change the delay
as required. For more information, refer to Interrupt Clear Timer on page 9-79.
Copy Image
Auto 100%
Paper Zoom
Original : A4
Selection
Zoom : 100%
1-sided Off
Paper : A4
>>1-sided
Preview
Duplex Combine
Quick Setup Org./Paper/ Image Quality
Finishing
Status
Copies
Shortcut 1
Shortcut 2
Shortcut 3
Normal 0
Shortcut 4
Density
Shortcut 5
Off
Shortcut 6
Staple
/Punch
Layout/Edit Advanced Program
Setup
10/10/2010 10:10
1
Press the Interrupt key.
The current print job is temporarily interrupted.
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
3-17
Basic Operation
3