Kyocera TASKalfa 5500i Operation Manual page 108

Duplex
Produce two-sided copies. The following duplex options are available.
You can also create single-sided copies from two-sided originals or originals with facing pages such as books.
The following modes are available.
One-sided to Two-sided
3
2
1
Original
ghi
def
abc
Original
Two-sided to One-sided
Original
Two-sided to Two-sided
3
1
Original
5
4 5
3
1
Copy
A B
ghi
ghi
abc
abc
def
Copy
1 1 2
Copy
5
3
1
Copy
Produces two-sided copies from one-sided originals. In
case of an odd number of originals, the back side of the
last copy will be blank.
The following binding options are available.
A Original Left/Right to Binding Left/Right: Images on
the second sides are not rotated.
B Original Left/Right to Binding Top: Images on the
second sides are rotated 180°. Copies can be bound
on the top edge, facing the same orientation when
turning the pages.
Copies each side of a two-sided original onto two
individual sheets. The optional document processor is
required.
The following binding options are available.
• Binding Left/Right: Images on the second sides
are not rotated.
• Binding Top: Images on the second sides are
rotated 180°.
Produces two-sided copies from two-sided originals.
5
The optional document processor and the Expansion
Memory are required.
NOTE:
The paper sizes supported in Two-sided to
Two-sided are A3, B4, A4, A4-R, B5, B5-R, A5-R,
Ledger, Legal, Letter, Letter-R, Executive, Statement-
R, Oficio II, 216×340mm and Folio.
3-12
Basic Operation