Kyocera TASKalfa 5500i Operation Manual page 486

Error
Error Message
Code
1104 Failed to send the e-mail.
Failed to send i-FAX.
1105 Failed to send via SMB.
Failed to send the e-mail.
Failed to send via FTP.
Failed to send i-FAX.
1106 Failed to send the e-mail.
Failed to send i-FAX.
1131 Failed to send via FTP.
1132 Failed to send via FTP.
2101 Failed to send via SMB.
Failed to send via FTP.
Failed to send the e-mail.
Failed to send i-FAX.
Corrective Actions
Check the e-mail address.
NOTE:
If the address is rejected by
the domain, you cannot send the e-
mail.
Check the i-FAX address.
NOTE:
If the address is rejected by
the domain, you cannot send i-FAX.
Select [On] of the SMB settings on
the Command Center RX.
Select [On] of the SMTP settings on
the Command Center RX.
Select [On] of the FTP settings on the
Command Center RX.
Select [On] of the i-FAX settings on
the Command Center RX.
Check the sender address of SMTP
on the Command Center RX.
Select [On] of the secure protocol
settings on the Command Center RX.
Check the following of the FTP
server.
- Is FTPS available?
- Is the encryption available?
Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number
Check the network and Command
Center RX.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- POP3 server name of the POP3 user
- SMTP server name
12-18
Troubleshooting
Reference Page
3-23
FAX System (V)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
2-25
FAX System (V)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
2-25
2-25
2-25
2-25