Banner Printing - Kyocera TASKalfa 5500i Operation Manual

Banner printing

When a document length from 470.1 mm (18.51") to a maximum of 1220.0 mm (48") is specified for printing,
the print job is treated as banner printing.
Max. number of sheets
Paper width
Paper length
Paper weight
Paper type
* When the banner tray (option) is used, up to 10 sheets of banner paper can be fed continuously .
(Refer to Using the Banner Tray (Option) on 5-7.)
Follow the steps below to set banner paper in the printer driver.
NOTE:
When KPDL is used for PDL Settings of the printer driver, a length setting of 470.5 mm (18.53") or
longer is handled as banner print.
1 sheet (manual feed), 10 sheets (when optional banner tray is attached*)
210 (8.26") to 304.8 (12") mm
Max. 1220 (48") mm
2
136 to 163 g/m
Heavy 2
1
2
3
5-5
Click the Basic tab and then click the Page Sizes
button.
Click the New button, enter the name, length
(470.1 mm or longer), and width of the custom
paper size being registered, and click the OK
button.
Click Print size, select the custom paper size that
you registered, and click the OK button.
Printing
5