Command Center Rx (Settings For E-Mail) - Kyocera TASKalfa 5500i Operation Manual

Command Center RX (Settings for E-mail)

Command Center RX is a tool used for tasks such as verifying the operating status of the machine and changing
the settings for security, network printing, E-mail transmission and advanced networking.
NOTE:
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer
to the Fax System (V) Operation Guide.
The optional Fax Kit is required in order to make use of fax functionality.
To change settings in Command Center RX, you must log in as an administrator of the machine.
The default factory settings are set as shown below.
Login User Name: Admin
Login Password: Admin
* Upper case and lower case letters are distinguished (case sensitive).
The procedure for accessing Command Center RX is explained below.
1
Launch your Web browser.
2
In the Address or Location bar, enter the machine's IP address.
e.g.) http://10.183.51.41/
The web page displays basic information about the machine and Command Center RX as well as their
current status.
3
Select a category from the navigation bar on the left of the screen. The values for each category must be
set separately.
If restrictions have been set for Command Center RX, enter the correct user name and password to access
pages other than the startup page.
For details, refer to the Command Center RX Operation Guide.
2-24
Preparation before Use