Kyocera TASKalfa 5500i Operation Manual page 351

Scan Resolution
The resolution of forwarded copies can be set. The options are 200x100dpi Normal, 200x200dpi Fine,
200x400dpi Super Fine, 300x300dpi, 400x400dpi Ultra Fine, 600x600dpi.
NOTE:
Jobs sent by Network FAX are sent in the same resolution as the resolution for fax transmission.
Use the procedure below to set the default Scan Resolution.
1
Press the System Menu key.
2
Press [Send] > [Next] of Send and Forward > [Change] of Scan Resolution.
3
Select the resolution.
4
Press [OK].
File Format
Select the file format of forwarded transmission copies. The table below lists the file formats and their details.
File Format
PDF*
TIFF
JPEG
XPS
High Comp.
PDF*
* The file format can be set to [PDF/A-1a] or [PDF/A-1b].
NOTE:
When [High Comp. PDF] is specified, you cannot adjust the image quality.
You can use PDF encryption functions. For details, refer to the following PDF Encryption Functions.
Adjustable range of image
quality
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Compression Ratio Priority
to 3 Quality Priority
9-51
Default Setting (System Menu)
Color Setting
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Full
Color, Grayscale
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale
9