Kyocera TASKalfa 5500i Operation Manual page 104

Density
Use this procedure to adjust the density when copying.
You can adjust density using 7 or 13 levels.
The procedure for adjusting the density of copies is explained below.
Density
Lighter
-3 -2
Original : A4
Zoom : 100%
-2.5
Paper : A4
Preview
Add Shortcut
Status
Copies
Normal Darker
-1 0 +1 +2 +3
-1.5 -0.5 +0.5 +1.5 +2.5
Cancel OK
10/10/2010 10:10
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Image
Quality] -> [Density].
4
Adjust density pressing [-3] (Lighter) to [+3]
(Darker). You can change the density level [-3]
(Lighter) to [+3] (Darker) in half-steps.
5
Press [OK].
6
Press the Start key. Copying begins.
3-8
Basic Operation