Kyocera TASKalfa 5500i Operation Manual page 179

The procedure for using Booklet copying is explained below.
Booklet
Original
Off
1-sided
>>Booklet
Finishing
2-sided
>>Booklet
Book
:
Original A4
>>Booklet
Zoom : 100%
:
Paper A4
Preview
Add Shortcut
Status
1
2
3
4
Copies
Off
Binding
Left/Right
Cover
Binding
Top
Off
Staple
Binding
/Fold
Left
5
Binding Top Edge
on Top
Right
Original
Binding
Orientation
Top
Cancel
OK
10/10/2010 10:10
6
7
8
NOTE:
Saddle Stitch stapled varies by paper weight. For
details, refer to Center-Folding Unit (Option) on page
Appendix-29.
9
10
NOTE:
originals in page order.
4-21
Press the Copy key.
Place the originals on the platen.
Press [Layout/Edit] and then [Booklet].
Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from
an open book original.
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
Press [Original Orientation] to choose the
orientation of the originals, either [Top Edge on Top]
or [Top Edge on Left]. Then press [OK].
If the optional 4,000 sheet document finisher and
folding unit are installed, the [Staple/Fold] option is
displayed.
To fold finished copies in half, press [Staple/Fold]
and then press [Fold Only].
To use saddle stitching, press [Staple/Fold] and
then press [Saddle Stitch].
The number of sheets that can be folded or
Press [OK].
Press the Start key. Copying begins.
When using the platen, be sure to place the
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
Copying Functions
4