Paper Output - Kyocera TASKalfa 5500i Operation Manual

Paper Output

You can use the procedure below to select an output destination such as the optional document finisher for your
copies.
NOTE:
Optional output destinations include the job separator, 1,000 sheet document finisher, 4,000 sheet
document finisher, and mailbox.
The table below shows the available output destinations.
Destination
Inner tray*
Finisher Left Tray
Finisher Top Tray
Tray A, Tray B, Tray C
Right Tray
Job Separator Tray*
Tray 1 to 7
* This cannot be selected when the optional document finisher is installed.
NOTE:
To change the default destination for copies, refer to Paper Output on page 9-15 for details.
When [Heavy 3] (164 g/m
destination, the output destination is automatically changed to a tray that can be used.
Use the procedure below to select the output destination.

Paper Output

Tray A Tray B
Original : A4
Tray 1 Tray 2
Zoom : 100%
Paper : A4
Tray 5 Tray 6
Preview
Add Shortcut
Status
Inner tray of the machine (where copies are stored)
Tray of the optional 1,000 sheet document finisher
Trays A to C in the optional 4,000 sheet document finisher
Optional right job separator
Optional Inner job separator
Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)
2
- ) or higher is set in Paper Weight and Mailbox (Option) is set for the output
Copies
Face Up
Right Tray
Tray C
Tray 3 Tray 4
Tray 7
Cancel OK
10/10/2010 10:10
Description
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Paper
Output].
4
Select the output destination for finished copies.
5
Press [OK].
6
Press the Start key to start copying.
4-13
Copying Functions
4