Dp Read Action - Kyocera TASKalfa 5500i Operation Manual

Maximum Number of Repeat Copy Jobs Retained
You can use the procedure below to change the maximum number of copy jobs that can be retained in the
document box.
Use the procedure below to change the maximum number of copy jobs retained.
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
Status

DP Read Action

Set the operation when a document is scanned from the document processor. The table below shows the
available settings.
Item
Speed Priority
Quality Priority
NOTE:
The optional document processor is required.
Cannot be used when set to [On] in Document Guard on page 9-108.
Use the procedure below to set a DP Read Action
(0 - 50)
32
job(s)
Cancel OK
10/10/2010 10:10
Priority given to scanning speed.
Priority given to image quality.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory] and
then [Next] of Job Box.
3
Press [Change] of Repeat Copy Job Retention.
4
Use the [+] or [-] key to enter the maximum
retention number.
You can also enter the number from the numeric
keys.
A number between 0 and 50 can be entered as the
number of retained jobs.
NOTE:
If you enter a value of 0 (zero), you cannot use
the Repeat Copy function.
5
Press [OK].
Detail
1
Press the Copy key.
2
Place the original.
3
Press [Advanced Setup] and then Press [DP Read
Action].
4
Select [Speed Priority] or [Quality Priority].
5
Press [OK].
6
Press the Start key. Copying begins.
4-44
Copying Functions