Auto Paper Selection; Auto Image Rotation Action - Kyocera TASKalfa 5500i Operation Manual

Auto Image Rotation Action

Set whether the image is rotated when the orientation of the document to be printed is different from the
orientation of the paper.
NOTE:
This function is only enabled when Auto Image Rotation for the copy function (page 4-38) is set to
[On].
The table below shows the available settings.
Item
Unrotated
Manual Copy
Apply All
Follow Image
Size
The procedure is as follows.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Auto Image Rotation Action.
3
Select [Unrotated Manual Copy], [Apply All], or [Follow Image Size].
4
Press [OK].

Auto Paper Selection

If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table
below shows the available settings.
Item
Most Suitable Size
Same as Original Size
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to specify the action performed for Auto Paper Selection.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Auto Paper Selection.
3
Press [Most Suitable Size] or [Same as Original Size].
4
Press [OK].
If a paper source or zoom ratio is specified, the image is not rotated.
Rotates all images.
The image is rotated if the rotated image fits on the paper.
Select paper based on the current zoom and the size of the original.
Select paper that matches the size of the original, regardless the zoom.
9-43
Default Setting (System Menu)
Description
Description
9