Kyocera TASKalfa 5500i Operation Manual page 109

Book to One-sided
1 2
Original
Book to Two-sided
Facing pages
-> Two-sided
1 2 3 4
2 1 4 3
Original
The procedure for using two-sided/duplex copying is explained below.
Duplex
1-sided
>>1-sided
1-sided
>>2-sided
2-sided
>>1-sided
Finishing
2-sided
>>2-sided
:
Original A4
Book
Zoom : 100%
>>1-sided
Binding
:
Paper A4
Left/Right
Book
Preview
>>2-sided
Add Shortcut
Status
Produces a 1-sided copy of a 2-sided or open book
original.
1 2
The following binding options are available.
•
Copy
•
NOTE:
supported in Two-sided to One-sided and Book to One-
sided. Original: A3, B4, A4-R, B5-R, A5-R, Ledger,
Letter-R and 8K. Paper: A4, B5, Letter and 16K. You
may change paper size and reduce or enlarge copy to
match that size.
Produces two-sided copies from an open book original
Facing pages
with facing pages.
-> Facing pages
3
1
2
NOTE:
1
supported in Book to Two-sided mode. Original: A3,
B4, A4-R, B5-R, A5-R, Ledger, Letter-R and 8K. Paper:
3
2 1
A4, B5 and Letter.
1
Copy
1
2
3
4
Copies
5
Top Edge
on Top
Binding
Original
Top
Orientation
Cancel OK
10/10/2010 10:10
3-13
Binding Left: Originals with facing pages are
copied from left to right.
Binding Right: Originals with facing pages are
copied from right to left.
The following sizes of originals and paper are
The following sizes of originals and paper are
Press the Copy key.
Place the originals on the platen.
Press [Layout/Edit] and then [Duplex].
Select the desired Duplex option.
If you choose [1-sided>>2-sided] or
[2-sided>>2-sided], select the binding edge of the
finished copies of Finishing.
If you choose [Book>>2-sided], press [Book>>2-
sided] or [Book>> Book] of Finishing to select the
setting for duplex.
Basic Operation
3