Toro Workman HD Series Service Manual page 98

19.If PTO cover is on transaxle, remove cap screws and
nut with washer. Separate PTO cover from transaxle
case. Inspect PTO cover for cracks or damage and re-
place if necessary.
20.Remove oil cap and O−ring from transaxle case if
necessary.
21.Remove air breather if necessary.
22.Loosen flange head screws and remove upper cover
from transaxle case.
Drive Train
1. Cap screw (5)
2. Nut
1
1. Oil cap
2
1
1. Flange head screw (4)
Page 6 − 28
2
1
Figure 39
3. PTO cover
2
Figure 40
2. Air breather
Figure 41
2. Upper cover
Workman HD Series
3