B. Insert steel balls and springs into the grooves.
C. Apply silicone sealant to mating surface of fork
shaft case.
D. Install fork shaft case. Install and tighten flange
head screws to a torque from 18.5 to 22 ft−lb (24.5
to 29.5 N−m).
E. Check operation of shifters and detent.
28.Insert a washer into housing of transaxle case. Apply
moly disulfide grease to washer before installing.
Workman HD Series
1. Spindle
2. Spring (2)
2
1. Flange head screw (1)
2. Flange head screw (3)
Page 6 − 51
2
3
1
Figure 99
3. Ball (2)
3
1
18.5 to 22 ft−lb
2
(24.5 to 29.5 N−m)
Figure 100
3. Fork shaft case
1
Figure 101
1. Washer
2
Drive Train