Toro Workman HD Series Service Manual page 122

29.Install differential gear assembly together with fork
shaft onto transaxle case.
30.Install side cover:
A. Insert dowel pins onto transaxle case.
B. Apply silicone sealant onto mating surface of side
cover.
C. Install side cover and secure with ten (10) flange
head screws. Torque screws from 18.5 to 22 ft−lb
(24.5 to 29.5 N−m).
Drive Train
1. Differential gear assy.
Page 6 − 52
Figure 102
1
Figure 103
2. Fork shaft
18.5 to 22 ft−lb
(24.5 to 29.5 N−m)
Figure 104
Workman HD Series
2