Toro Workman HD Series Service Manual page 96

13.Remove roll pin from differential lock lever. Remove
lever from shaft. Loosen and remove five (5) flange
head screws. Remove L.H. side cover from transaxle
case.
14.Inspect side cover for cracks or damage and replace
if necessary.
15.Loosen and remove four (4) flange head screws. Re-
move R.H. axle shaft assembly from transaxle case.
16.Remove differential gear assembly together with
fork shaft assembly.
Drive Train
3
1. Lever
2. Flange head screw (5)
1
2
1. Flange head screw (4)
1. Differential gear assy.
Page 6 − 26
2
1
Figure 33
3. L.H. Side cover
Figure 34
2. R.H. Axle shaft assy.
1
Figure 35
2. Fork shaft assy.
Workman HD Series
2