Toro Workman HD Series Service Manual page 134

4. Assemble PTO output shaft:
A. If bearing was removed, use a press to install
bearing onto output shaft.
B. Install washer and retaining ring.
C. Install retaining ring and gear.
D. Use a press to install bearing.
5. Use a press to install bearing onto intermediate
shaft.
Drive Train
6
2
3
1. Bearing
2. Gear
3. Retaining ring
4. Retaining ring
1. Bearing
2. Gear
3. Retaining ring
4. Retaining ring
1
Page 6 − 64
5
Figure 132
5. Thrust washer
6. Bearing
7. Output shaft
Figure 133
5. Thrust washer
6. Bearing
7. Output shaft
Figure 134
1. Bearing
Workman HD Series
4
7
1