Toro Workman HD Series Service Manual page 102

27.Disassemble fork shaft assemblies:
A. Remove lock pin from 2nd−3rd fork shaft assem-
bly.
B. Note or mark mating shafts and forks for as-
sembly.
C. Remove shift fork from fork shaft.
D. Remove lock pin from 1st−R fork shaft assembly.
E. Remove shift fork from fork shaft.
28.Disassemble Hi−Lo fork shaft assembly:
A. Remove shift fork, steel ball and spring from Hi−
Lo shift fork assembly.
B. Remove E−ring.
Drive Train
1. Lock pin
2. Shift fork
1
1. Shift fork
2. Steel ball
3. Spring
Page 6 − 32
Figure 49
3. Fork shaft
5
4
3
2
Figure 50
4. E−ring
5. Hi−Lo fork shaft
Workman HD Series