Fuel System - Toro Workman HD Series Service Manual

Fuel System

175 to 200 in−lb
(20 to 22 N−m)
11
17
10
RIGHT
FRONT
1. Fuel hose (to engine)
2. Hose clamp
3. Fuel hose (to vacuum valve)
4. Vacuum check valve
5. Fuel hose (to engine)
6. Filter hose
7. Canister filter
8. Fuel hose (tank to canister)
DANGER
Because gasoline is highly flammable, use cau-
tion when storing or handling it. Do not smoke
while filling or servicing the fuel tank. Do not fill
or service fuel tank while engine is running, hot
or when vehicle is in an enclosed area. Always fill
fuel tank outside and wipe up any spilled fuel be-
fore starting the engine. Store fuel in a clean,
safety−approved container and keep cap in
place. Use fuel for the engine only; not for any
other purpose.
Kubota EFI Gasoline Engine
20
12
8
18
14
9. Flange nut (2)
10. Fuel tank
11. Fuel cap
12. Fuel pump/sender assembly
13. Carbon cannister
14. Support tube
15. Retainer plate
2
1
TO
ENGINE
22
19
5
15
9
21
16
Figure 8
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the Operator's Manual. Check lines for dete-
rioration, damage, leaks or loose connections. Replace
hoses, clamps and connections as necessary.
Page 3 − 10
3
4
6
8
7
TO
PURGE
PORT
16. Washer head screw (2)
17. Rollover valve
18. Grommet
19. Washer head screw (2)
20. Cap
21. Gasket
22. Fuel filter
Workman HDX
13