Upper Panel; Control Panel - Sony SRW-9000 Operation Manual

recorded. Connect an external device to increase
the number of audio input channels, or to
synchronize this unit to the output of an HD
device.
When you use this connector for HDSDI input,
set SYSTEM Setup >FORMAT >INPUT SEL
(see page 164) in the VTR menu to AUX Input.
m HD SDI MON2 (HDSDI monitor
output 2) connector (BNC type)
Use in the same way as the HD SDI MON1
connector on the left-side panel (see page 16).

Upper Panel

Control panel

(page 20)
With control panel detached
a Lock release button
When removing the control panel, use this button.
For details, see "Attaching the Control Panel" (page
36).
b Handle
Use to carry the unit.
You can attach an accessory to the seven screw
3 1
holes ( / " × 4, / " × 3) on the top of the handle.
8 4
You can also attach the CAC-12 Microphone
Holder to the side of the handle.
For details, see "Using a Microphone" (page 33).
20 Locations and Functions of Parts
c Assistant panel attachment screws
Attach the optional AP-1 Assistant Panel or the
CAC-12 Microphone Holder.
For details, see "Attaching the AP-1 Assistant Panel
(Optional)" (page 38) or "Using a Microphone"
(page 33).
d Cable holder attachment screws
Attach the supplied cable holder to hold the cable
of the control panel or the optional AP-1 Assistant
Panel.
e Accessory attachment screw holes
You can attach accessories to the two screw holes
3 1
( / " × 1, / " × 1).
8 4
f EJECT button
Pressing this button opens the lid of the cassette
insertion slot, allowing you to take out the
inserted cassette.
Control Panel
The control panel is used mainly for control of the
VTR module.
a VTR menu selection buttons
Select one of the VTR menus or the Camera menu
to be shown on the display.
HOME button: Displays the HOME screen. The
HOME screen displays audio levels,
operating status, warnings, time data, and
other information.
TC button: Displays the TC (timecode) Setup
menu (see page 157). This menu allows you
to switch between LTC and VITC, to switch
between DF and NDF, and to display
timecode on an external monitor.