Sony SRW-9000 Operation Manual page 53

Indication Target page
GAIN L/M/H Gain switch values (L/M/H)
page
LENS FILE Lens file selection page
VTR STATUS VTR status page
TC/TAPE REM Timecode/tape remaining
page
VOLT/FAN Voltage check/Fan mode page
CHAR MIX Character data page
ASSIGN SW1/ Assignable buttons 1 and 2
SW2 setting page
ASSIGN SW3/ Assignable button 3 and
SW4 switch 4 setting page
ASSIGN SW5/ Assignable buttons 5 and 6
SW6 setting page
ASSIGN SW7/ Assignable buttons 7 and 8
SW8 setting page
ASSIGN SWN/ Assignable buttons N and C
SWC setting page
BRIGHT Subdisplay brightness
adjustment page
GAMMA TABLE Gamma table selection page
To select pages with a menu operation
Use the <SUBDISPLAY 2> page of the Camera
>USER (OPERATION) menu.
For details on how to operate the Camera menu, see
"Basic Camera Menu Operations" (page 113).
<SUBDISPLAY 2> page
Move the cursor to PAGE SELECT then press the
MENU SEL/ENTER dial to display to the
<PAGE SELECT> page.
<PAGE SELECT> page
To switch between ON/OFF settings, move the
cursor to the setting you wish to change and press
the MENU SEL/ENTER dial.
Note
"RAMP" appears only when the optional HKSR-9002 is
installed.
Basic Settings with the Subdisplay 53