Chapter 5 Memory Recording (With Hksr-9002 Installed); Timer Rec; Manual Timer Rec - Sony SRW-9000 Operation Manual

5 Memory Recording (With HKSR-9002 Installed)
Chapter
You can use the memory on the optional HKSR-
9002 Picture Cache Board to perform the
following kinds of recording while maintaining
the high quality of the HDCAM-SR (1920 ×
1080) format.
• SR Motion: Provides slow and quick motion
effects.
• Timer Rec: Captures and records images at
specified intervals.
• Cache Rec: Allows you to record video and
audio from a few seconds before the time when
you press the recording start button (in standby
on mode).
When installing the HKSR-9002 in this unit, refer to
the HKSR-9002 Installation Manual.
For details on SR Motion, see Chapter 6 "SR Motion
(With HKSR-9002 Installed)" (page 97).

Timer Rec

The Timer Rec function allows you to use the
memory of the optional HKSR-9002 board to
capture and record images at specified intervals.
It is comparable to the Interval Rec function of
previous models, but enables time-lapse
recording and recording over longer periods.
The following two methods are available.
Manual Timer Rec: Specifies the number of
frames to record in a single take. Each time
that recording starts, the specified number of
frames are captured continuously.
Auto Timer Rec: Specifies the number of frames
to record in a single take and the interval
(seconds) between takes. Each time that
recording starts after the specified interval,
the specified number of frames are captured
continuously.
The following formats can be recorded by Timer
Rec.
1080 422: 23.98/24/25/29.97PsF, 50P, 59.94P
1080 444SQ/444HQ: 23.98/24/25/29.97PsF
Note
Timer Rec cannot be used at the same time as Cache Rec.

Manual Timer Rec

Note
Set SELECT FPS in the SYSTEM Setup menu to "OFF".
1
In the SYSTEM Setup menu, set EDIT
>TIMER REC to "MANU".
2
In the submenu window, select "Manu
Frm" and then press the SELECT/
ENTER dial.
A setting window opens.
Timer Rec 93