Setting Menu Items - Sony SRW-9000 Operation Manual

CONTENTS page (Example: USER menu)
cursor
If the screen can be scrolled, arrows indicate
the direction of scrolling.
The selected page is displayed.
Changing the displayed page
1
Check that the cursor is located at the
left of the page number and then press
the MENU SEL/ENTER dial.
The cursor changes to a flashing question
mark (? symbol).
2
Turn the MENU SEL/ENTER dial to
flip through the pages.
3
When the desired page appears, press
the MENU SEL/ENTER dial.
The "?" symbol will change back to the
cursor (c or b), and operations with the
displayed page will be enabled.
Page number
flash

Setting Menu Items

If a "?" symbol is flashing at the left of the page
number, press the MENU SEL/ENTER dial to
change it to the cursor (c or b). Making settings
on the displayed page is then enabled.
Changing the setting
1
Turn the MENU SEL/ENTER dial to
align the cursor with the desired item.
2
Press the MENU SEL/ENTER dial.
The cursor changes to a flashing "?" symbol.
3
Turn the MENU SEL/ENTER dial to
change the setting value.
When the knob is turned quickly, the values
change quickly; when turned slowly, the
values change slowly.
To reset a changed value
Press the CANCEL/STATUS button.
To interrupt settings
Press the VF MENU/DISPLAY button.
To restart the setting operation, press the VF
MENU/DISPLAY button again.
4
Press the MENU SEL/ENTER dial.
The "?" symbol changes back to the cursor
(c or b), and the new setting is registered.
5
To change other setting items on the
same menu page, repeat steps 1 through
4.
Specifying a character string
When you press the MENU SEL/ENTER dial
with the cursor pointing to an item for which a
character string, such as a file ID, is to be
specified, a cursor x and a list of selectable
characters appear.
You can move cursor by turning the MENU SEL/
ENTER dial.
1
Move the cursor to the position where
you want to enter a character then press
the MENU SEL/ENTER dial.
Another cursor appears on the character list.
Basic Camera Menu Operations 115