Cache Rec - Sony SRW-9000 Operation Manual

To check the amount of data in memory
Press FUNC + HOME twice. The amount
appears at the bottom of the display, together
with information such as the time remaining
until the start of the next recording (see page
99).
Note
Do not stop recording until the amount of data in
memory exceeds 20%. When there is only a small
amount of data in memory, recording may stop without
transferring the images to tape.

Cache Rec

The Cache Rec function captures about 200
frames of the video and audio that the camera is
currently shooting (or about 100 frames in HQ
mode) to the memory. Thus, when you press the
recording start button, the recording starts with
the data stored about 200 frames (or about 100
frames in HQ mode) before (if the unit is in
standby on mode and SR Motion is not being
used).
Notes
• To maximize the Cache Rec effect, it is recommended
that the Cache Rec function be used in standby on
mode and with SR Motion disabled. Though the Cache
Rec function can be used in standby off mode or
together with SR Motion, the unit may be unable to
record video and audio from immediately before you
press the recording start button.
• Cache Rec cannot be used at the same time as Timer
Rec.
With the formats which support SR Motion,
Cache Rec can be used together with SR Motion.
For details on the formats, see the table on page 100.
To record using the Cache Rec function
1
In the SYSTEM Setup menu, set EDIT
>CACHE REC to "25%", "50%",
"75%", or "100%".
When the Cache Rec function is active, "C"
appears on the HOME screen before the
number of lines of the signal format.
Cache Rec 95