Sony SRW-9000 Operation Manual page 133

PAINT menu
Page title & No.
purpose
<DETAIL 2> P09[ - - ]
Adjust the
emphasis of edges
in the video
<SKIN DETAIL> P10[ - - ]
Emphasize the
edges of specific
color components
Item Default
H/V RATIO 0
FREQ 0
MIX RATIO 0
KNEE APT 0
OFF
ABS
SKIN DTL OFF
SKIN GATE OFF
ABS
CH SW [1] [2]
(ON) OFF OFF
HUE EXEC
PHASE 0
WIDTH 29
SAT –89
LEVEL 0
Settings
–99 to +99
–99 to +99
–99 to +99
–99 to +99
ON, OFF
ON, OFF
ON, OFF
OFF, 1, 2, 3
[3] ON, OFF
Execute by ENTER
0 to 359
0 to 90
–99 to +99
–99 to +99
Remarks
Specify the vertical
factor of the contour
emphasis (absolute
values are displayed in
ABS mode).
Adjust the video
frequency components
to be emphasized
(Absolute values are
displayed in ABS
mode).
Absolute value is
displayed in ABS
mode.
Edge emphasis in high-
luminance areas
compressed by the
KNEE function
(absolute values are
displayed in ABS
mode).
Highlighted: ABS
(Absolute) mode
Fixed to OFF in Cine
mode
1, 2, 3: Skin gate can
be set to ON for
the specified
channel only.
With the ON setting, a
zebra pattern is
displayed for the color
component affected by
the DETAIL function.
Highlighted: ABS
(Absolute) mode
The skin tone detail
function can be
independently set for
each channel (channel
1 is always ON).
HUE: For automatic
detection of the
target color
Absolute values are
indicated for LEVEL
only in ABS mode.
Camera Menu List 133