Sony SRW-9000 Operation Manual page 37

Holder attachment screws
Cable holder
5
Attach the control panel.
6
Connect the cable of the control panel to
the CTRL (VTR) connector, and store
the excess length of the cable in the
cable holder.
1 Release the buckle
of the holder, 2 bundle
the cable by winding the
holder around it, 3 then
lock the buckle again.
7
Adjust the length by pulling the lower
end of the holder.
To use the cable holder of the AP-1 Assistant
Panel
When you are using the optional AP-1 Assistant
Panel, you can attach a cable holder to the AP-1
attachment hook base, and use the cable holder to
store the cable of the control panel.
AP-1 Assistant Panel (optional)
See "Attaching the AP-1 Assistant Panel (Optional)"
(page 38) for more information about attaching the
AP-1.
Attaching the Control Panel 37